Technical capacity (registration)
35500 kg
Axle capacity (registered)
3x8000 kg
King pin load (registered)
11500 kg
Curb weight (Base 5mm, sides 4mm)
14200 kg (+-%3)
Chassis
It will be manufactured in a cylindrical shape using MC 700 material with 4 mm and 6 mm thickness. Pad reinforcement of appropriate thickness will be made where necessary.
The drive gear and the return bearing will be mounted to the rear of the roller with a bolted connection. (The bearing will be made of CrMoNi material). There will be a metal ring mounted on the tube on the carrier wheels at the front.
Cover opening
The filling cover will be opened pneumatically, the discharge cover will be hydraulically opened.
Trash Feeding
Compression and unloading processes are provided by the rotating cylinder making 6 revolutions per minute around its axis. Compression will be provided by a rotating cylinder, a garbage transfer chamber placed in the open mouth of the cylinder, a double groove placed inside the cylinder and a compression cone placed at the rear end. If the garbage gets stuck with a foreign material during filling, there will be a protective system that will automatically stop the rotation.
Back cover
The part of the back cover that comes into contact with the garbage will be manufactured using 400-450 brinel wear steel. There are parts made of wear-resistant chrome-nickel alloy steel casting material, which are mounted with screws in the wear areas. There is a waste water tank on the cover in order to collect the leaking water of the garbage.
I profile
Upper and lower blades will be manufactured using 120x12 S500MC, 6 mm S700MC mirror sheet material.
Chassis I profile will be welded by submerged arc welding method.
Chassis crosses
Chassis main crosses will be made of 6 mm S700MC, other crosses will be made of S355 J2 material.
Buffer
Specially designed E-certified bumper.
Side protection
Side protection in accordance with ECE R73 regulation
King-pin
Flanged king-pin which can be removed with 3.5" bolt in accordance with ECE R55 regulation.
Hydraulic Feet
Hydraulic feet, each with a carrying capacity of 24 tons.
Engine
In order to ensure the rotation of the cylinder independently of the towing vehicle, the HATZ brand diesel engine is located in the chassis.
Pump
Rexroth brand pump 72 cc,
Oil tank
There will be an oil tank of suitable capacity positioned on the trailer. There will be a temperature and level indicator on the tank and a pollution indicator on the filter.
Automatic lubrication
There is an automatic lubrication system that feeds all critical points that move such as bearings, gears, pinion gears, ring wheels.
Axles
3x9 tons single tire with air suspension (BPW drum axle)
Scissor systems
BPW brand Straight scissors
Suspension type
with air suspension
Shock absorber
BPW brand trailer type shock absorber
Tire and Rim
6 tires and wheels, size 385/65R 22.5.
Fender
Fully-treaded ETP mudguard.
EBS Modulator
2S2M EBS Modulator
Brake chambers
A total of 4 emergency brake bellows of 24”/30” on 2 axles, 2 pieces on 1 axle
24” service brake chamber is used.
Brake ratchets
Automatic brake ratchets are used.
Parking brake valve
Emergency stop and ramp valve are used.
Electrical system
24 volt lighting system in accordance with ECE R48 regulation.
Paint
After sandblasting, double coat epoxy primer, double coat full acrylic oven paint.
