TECHNICIAL SPECIFICATIONS
Volume
7.000lt ~ 28.000lt
Weight
400kg ~1.850kg ±3% + (Pump + Counter + Pulley + Hose)
Design Tempature
-20 0C / +500C
Tank
TSE ADR Approved ELLIPTIC Type Design from EN AW 5182 H111 Material in TS EN 13094 Standards
ISO 3834 Welded Manufacturing Quality Conditions Standard approved manufacturing
Minimum number of ( T ) welding points with the use of longitudinal plates in the main body
Non-porous welding with continuous TIG welding across the sheet with Seamer Welding Machine
Non-porous Dish and Body Joint welds with Column – Boom and rotation machine
The tank will be connected to the subframe on the vehicle with the saddles and bolts on it.
Rubber Wedges will be placed under the saddles to dampen vibration and provide flexibility.
The front part of the subframe will be flexible and the rear part will be rigidly connected.
Auxiliary Chassis
Min. “C” section subframe in 8mm S355 material
(Bottom fill system) Discharge
Safe forced discharge with 4” (DN100) API Adapters in the Plumbing cabinet on the RIGHT according to the driving direction
Discharge line made of 4” (DN100) Aluminum pipe, which is sloped so that there is no liquid inside, extending from Base Valves to API Adapters in the Plumbing cabinet
1 pcs Breather Integrated Steam Return Adapter
Pneumatic conditioner
Product Display in each pane
All ALT filling equipment used is ADR Certified German Made NIEHUSER Brand.
(Bottom filling system) Manhole Cover
Manhole Cover, which can be demounted and installed with 20” (DN500) diameter bolts or hoops in each compartment
1 Manhole Strait
1 x 10” (DN250) diameter top filling Cap
1 vacuum – pressure relief valve integrated Vapor Collection Valve
1 Level Stick
1 Piece Overfill Protection Optical Level Sensor
1 x Overfill Protection Socket
All ALT filling equipment used is ADR Certified German Made NIEHUSER Brand.
Pump (OPTIONAL)
Internal gear YILDIZ type 2 ½” diameter, 700 lt/min flow rate max. A 10bar pressure pump will be used.
Counter (OPTIONAL)
A Meter with Mechanical Numbering, 7-digit Totalizer, Air Separator, 3” inlet and outlet with filter, Min.75lt/min ~ Max.750lt/min flow, Nominal 3.5bar pressure, 0.025% Sensitivity will be used. COUNTER OPTIONS ARE OPTIONAL.
Reel and Hose will be Hose.
It will have a Mechanical or Pneumatic Wound Reel and a 1 ½” diameter 20 meter long fuel dispenser hose and an automatic gun at the end. (OPTIONAL) • There will also be 1 Composite Hose with a diameter of 3” and a length of 5 meters for forced discharge.
In addition, there will be 1 Composite Hose with a diameter of 3” and a length of 5 meters for forced discharge.
Walking Path
Non-slip walkway made of Aluminum, located on the right of the vehicle according to the driving direction
Stairs
Ladder made of aluminum located on the right of the vehicle according to the driving direction
Railing
Aluminum guardrail on both sides that can be opened pneumatically or mechanically
Hose Carrier
Aluminum / plastic Pipe with DN160 diameter located on both sides of the vehicle
Paint
Passivation process will be done before painting
2 coats of Epoxy primer application
2 coats of Acrylic Paint application
Accessories
ADR Plaques; UN Code + Hazard class + Environmental pollution warning sign on 3 sides of the vehicle
Grounding Pins 4 pcs
Fire extinguisher and Cabinet 2 pcs
Wheel Chock 2 pcs
1 piece of Grounding Reel in the cabinet
Ex-Proof Lighting in the Cabinet
Out-of-cabinet work lighting – Optional
Tanker Safety Rope
Preliminary Preparation of the Safety Brake System, which is activated by opening the cabinet door
Upper discharge valve extending from the upper pool down to the front left of the tanker